A fence is a delay, not a detection system. It buys time, and how much depends entirely on whether anyone knows the attempt is happening. Fence-mounted detection closes that gap by making the fence itself the sensor, so the alarm is raised at the moment of the attempt rather than when an intruder is already inside and in front of a camera.
A perimeter security fence is the physical barrier: it slows an intruder down. Fence intrusion detection is the sensor mounted on that fence: it raises an alarm the moment someone cuts, climbs or lifts it. The sensor does not replace the fence, and a fence without a sensor only delays an intrusion nobody sees. Put together, the two make a fence security system.
Three things defeat a fence: cutting through the fabric, climbing over it, and lifting it to crawl underneath. All three put energy into the fence structure, and all three sound different from wind, rain, traffic and a gate closing. A fence detection system has to tell those apart reliably enough that operators keep trusting it — a system that cries wolf gets switched off, which is the worst outcome of all.
IRONCLAD is a fence-mounted sensor cable that attaches to the fence fabric and detects cutting, climbing and lifting directly at the fence line. It is designed to be plug-and-play, which matters on sites without a specialist integrator on hand.
MicAlert is a microphonic sensor cable built specifically for rigid fences — welded mesh, palisade, wrought iron and aluminum. Rigid structures transmit the sharp, high-frequency signature of an attack cleanly, and MicAlert analyzes noise patterns to pick it out. On a rigid fence it is the more appropriate choice; on a flexible chain link fence, a cable designed for fabric movement will serve you better.
RaySense 分散型音響センシングは、標準的なシングルモード光ファイバーケーブルを最大100kmに及ぶ1本の連続したセンサーに変えるという、異なるアプローチを採用しています。フェンスに沿ってゾーンごとにハードウェアを設置する必要がないため、長大な境界線や、フェンス沿いへの電源供給が困難なサイトにおいて、経済性を大きく変えることになります。.
The honest way to choose between perimeter fence security systems is by fence construction first, run length second, and what infrastructure already reaches the perimeter third. If you tell us those three things we can usually narrow it to one.
| フェンス | Sensor, zone length, alarm location, output |
|---|---|
| Chain link, welded mesh, razor wire, concertina | IRONCLAD センサーケーブル Up to 1,000 ft (305 m) per zone, 2 zones per processor Alarm location: per zone Output: dry-contact relays |
| Rigid metal: palisade, ornamental, wrought iron, aluminum, welded metal | MicAlert microphonic cable Up to 1,000 ft (305 m) per zone, 2 zones per processor Alarm location: per zone Output: 8 dry-contact relays |
| Long perimeters | RaySense fiber optic (DAS) Up to 50 km (31 mi) per direction, 100 km per processor Alarm location: to 3 m (10 ft) Output: TCP/IP, relays, SDK/API |
| Existing SL-3 sites | SL-3 (legacy) Support and replacement parts only |
To get a zone plan, send us the fence type and condition, total length, number and type of gates, and the alarm panel or VMS you use. For a wider comparison, including buried fiber, ground radar and LiDAR, see Fence-Mount, Buried Fiber, Ground Radar, or LiDAR?
Fence sensors appear in the security standards that govern critical infrastructure — substation physical security, water utility resilience, port facility security plans and cargo handling standards all contemplate detection at the boundary rather than surveillance alone. If you are working to a named standard, say which one; the requirement usually dictates the detection approach more than the site does.
The SL-3 fence sensor also sits in this category. It is a legacy product, no longer supplied for new installations, and its page is kept for existing customers needing support and replacement parts.
RBtecは世界中で信頼される革新的な境界セキュリティソリューションを提供しています。57か国で5,000件を超える導入実績を持ち、当社製品はあらゆる規模・リスクレベルの施設に対し、信頼性、費用対効果、使いやすさを兼ね備えています。
