Ticari ve endüstriyel tesislerde, avluların, ekipmanların ve stokların çevresinde uzun çit hatları bulunur ve bu alanlardan personel, yükleniciler ve araçlar gün boyu geçmektedir. RBtec, çit boyunca gerçekleşen gerçek izinsiz girişleri tespit ederken, bu alana ait normal trafiği algılayıp alarm vermez.
Scale and traffic. A yard, depot or plant can run kilometers of fence around inventory, vehicles and equipment, and that fence is touched all day by staff, contractors, deliveries and machinery. A sensor sensitive enough to catch someone cutting through at two in the morning has to ignore a forklift, a gate, a delivery truck and the wind for the other twenty-two hours. Get that balance wrong and the system is switched off within a month.
Usually metal, fuel, cable, tools and equipment: things that move fast and are hard to trace once they leave the gate. The loss is rarely just the item. It is the rental cost of replacement equipment, the crew standing idle, the insurance deductible and the premium at renewal. A breach that takes ninety seconds can cost a week of schedule.
By filtering on the signal rather than turning the sensitivity down. The IRONCLAD çit alarm sistemi applies three layers of filtering to separate cutting, climbing and lifting from vibration caused by wind, rain, traffic and normal site movement. Gates and loading bays are put in their own zones so routine use never sits inside a protected run. Sensitivity is set on site during commissioning against live tests, then recorded.
The perimeter becomes the first line rather than the last. A zoned alarm tells the monitoring station or the on-call manager which section was crossed, so a camera can be called to the right place immediately instead of someone scrubbing footage afterwards. On sites with no fence on one side (an open yard, a haul road, a compound edge), buried ground sensors cover the gap with nothing visible to avoid.
It starts with a walk of the boundary and an honest look at how the site actually operates: where vehicles move, which gates are used, what runs at night. That produces a zone plan sized to the response you can realistically give: enough zones that an alarm is actionable, not so many that the panel becomes noise. Installation is staged so the site keeps working, and alarms are delivered on dry-contact relays into the VMS, alarm panel or SCADA already in place. Tell us about your site.
For a side by side comparison of sensor types, see the çevre güvenli̇ği̇ kilavuzu.
Detection at the fence, before anything is reached.
Zoned alarms that send a camera to the right spot.
Filtering that ignores the traffic that belongs there.
Dry-contact output into the VMS or panel already fitted.
Detects at the fence, not the doorFilters normal site trafficScales to kilometers of perimeterFeeds your existing VMSHer sahanın karşılaştığı sorunla birlikte gerçek kurulumlar,
ne kuruldu ve nasıl performans gösteriyor.
RBtec, dünya çapında güvenilen yenilikçi çevre güvenliği çözümleri sunmaktadır. 57 ülkede kurulu 5.000’den fazla sistemle ürünlerimiz, her türlü tesis büyüklüğü ve risk seviyesi için güvenilirlik, maliyet etkinliği ve kullanıcı dostu tasarımı bir araya getirmektedir.
