Le périmètre d'une prison pose deux problèmes distincts sur un même site : à quel endroit de la clôture et ce qui se trouve dans la porte de service. Le système RBtec répond à ces deux questions grâce à une détection par zones le long de la clôture et à un LiDAR volumétrique, dont les données sont transmises à la salle de contrôle où se trouvent déjà les agents.
Prison security systems have to stop three different events. Escapes over or through the dual fence lines, where seconds and an exact location decide the outcome. Contraband coming the other way: throw overs at the fence and, increasingly, drone drops into the yard. And the quiet structural problem behind both: tower posts that no longer have officers in them, as agencies replace static staffing with technology. Every one of these depends on detection the control room can trust, which is why nuisance alarm rate is the specification correctional buyers weigh hardest.
ACA accreditation carries performance based standards for adult institutions that include perimeter security expectations, and state departments of correction publish design standards that typically mandate perimeter intrusion detection on medium and maximum custody facilities. Federal facilities follow BOP specifications. Procurement is public bid, so systems that document their detection zones, alarm handling and maintenance cleanly have an advantage on paper as well as on the fence.
The dual fence lines take zoned sensing, so an attempt is reported with the zone and fence line, and response teams go to a place, not a sound. The sally port and vehicle gate take PulseVi 3D LiDAR, which watches volume rather than fabric: a person hiding where only a vehicle should be is exactly the event it exists for, and darkness does not change how it works. Walls and rooflines take WallAlert structural sensing, and the ground between fences can carry covert buried detection for digging and crawling attempts.
With tuning, not promises. Razor wire sings in wind and birds land on everything, so each zone carries its own sensitivity profile and the algorithms separate environmental noise from cutting and climbing. Detection is layered so the failure of officer trust that killed older systems, alarms nobody believes, does not repeat.
For a side by side comparison of sensor types, see the guide sur la sécurité du périmètre.
Zoned detection on both fence lines with exact location.
PulseVi volumetric watch on the sally port and rooflines.
WallAlert structural sensing on walls and buildings.
Per zone tuning against wind, birds and razor wire noise.
Response goes to a named zone, not a bare siren.No coverage seam at the gate, historically the weak point.Meets ACA and state DOC perimeter expectations.Alarms live in the control room officers already staff.Nous sommes là pour vous aider. Qu'il s'agisse d'une question rapide ou de quelque chose de plus complexe : aucune pression, juste des réponses.
Zoned sensing cable on the fence fabric, reporting cutting and climbing with the zone and fence line. Dual fence facilities typically instrument both lines separately so response teams know exactly where to go.
With volumetric sensing rather than fence sensing. A 3D LiDAR watches the volume of the sally port continuously and flags a person where only a vehicle should be, day or night, which closes the classic seam between fence zones at the gate.
Per zone sensitivity tuning and algorithms that separate environmental noise from intrusion signatures. Razor wire in wind and birds on the fence are profiled out zone by zone, which is what keeps officers responding to alarms instead of ignoring them.
Buried sensing between the fence lines detects digging and crawling activity in the corridor, adding a covert layer where determined attempts try to go under rather than over.
ACA performance based standards expect facilities to control and monitor their perimeters appropriately to custody level, and state DOC design standards commonly require perimeter intrusion detection outright for medium and maximum facilities. The documented zone map and alarm handling of the system are what auditors review.
Des déploiements réels, avec le problème rencontré sur chaque site,
ce qui a été installé et les performances obtenues.
RBtec propose des solutions innovantes de sécurité périmétrique qui ont gagné la confiance de clients du monde entier. Avec plus de 5 000 systèmes installés dans 57 pays, nos produits allient fiabilité, rapport qualité-prix et facilité d'utilisation, quelle que soit la taille du site ou le niveau de risque.
