Il perimetro di un carcere presenta due problemi distinti in un unico sito: in quale punto della recinzione e cosa si trova all’interno del varco di accesso. RBtec risolve entrambi i problemi grazie al rilevamento a zone della recinzione e al LiDAR volumetrico, trasmettendo i dati alla sala di controllo già presidiata dagli agenti.
Prison security systems have to stop three different events. Escapes over or through the dual fence lines, where seconds and an exact location decide the outcome. Contraband coming the other way: throw overs at the fence and, increasingly, drone drops into the yard. And the quiet structural problem behind both: tower posts that no longer have officers in them, as agencies replace static staffing with technology. Every one of these depends on detection the control room can trust, which is why nuisance alarm rate is the specification correctional buyers weigh hardest.
ACA accreditation carries performance based standards for adult institutions that include perimeter security expectations, and state departments of correction publish design standards that typically mandate perimeter intrusion detection on medium and maximum custody facilities. Federal facilities follow BOP specifications. Procurement is public bid, so systems that document their detection zones, alarm handling and maintenance cleanly have an advantage on paper as well as on the fence.
The dual fence lines take zoned sensing, so an attempt is reported with the zone and fence line, and response teams go to a place, not a sound. The sally port and vehicle gate take PulseVi LiDAR 3D, which watches volume rather than fabric: a person hiding where only a vehicle should be is exactly the event it exists for, and darkness does not change how it works. Walls and rooflines take WallAlert structural sensing, and the ground between fences can carry covert buried detection for digging and crawling attempts.
With tuning, not promises. Razor wire sings in wind and birds land on everything, so each zone carries its own sensitivity profile and the algorithms separate environmental noise from cutting and climbing. Detection is layered so the failure of officer trust that killed older systems, alarms nobody believes, does not repeat.
For a side by side comparison of sensor types, see the Guida alla sicurezza perimetrale.
Zoned detection on both fence lines with exact location.
PulseVi volumetric watch on the sally port and rooflines.
WallAlert structural sensing on walls and buildings.
Per zone tuning against wind, birds and razor wire noise.
Response goes to a named zone, not a bare siren.No coverage seam at the gate, historically the weak point.Meets ACA and state DOC perimeter expectations.Alarms live in the control room officers already staff.Siamo qui per aiutarti. Che si tratti di una domanda veloce o di qualcosa di più complesso: nessuna pressione, solo risposte.
Installazioni reali, con il problema affrontato da ciascun sito,
che cosa è stato installato e come funziona.
RBtec offre soluzioni innovative per la sicurezza perimetrale apprezzate in tutto il mondo. Con oltre 5.000 sistemi installati in 57 paesi, i nostri prodotti uniscono affidabilità, convenienza e facilità d’uso, indipendentemente dalle dimensioni del sito o dal livello di rischio.
